DF1+ Genius Mug Press
Bulk Quantity Prices
|1 to 1||£150.00 (excl. VAT)|
|2 to 5||£140.00 (excl. VAT)|
DF1+ Genius Mug Press.
The latest incarnation of our DF1 is now the DF1+ Genius Mug press with a standard heat blanket for sublimation mugs.
Our new entry level DF1+ Genius mug press offers excellent value for money for printing sublimation or laser transfer mugs. Ideal for all our standard mugs including the 11oz, European, El-Grande, Beer Steins, WOW, Blank Panel, Money Boxes, Sparta, Whiskey Glass and Glass Mugs.
The latest DF1+ Genius mug press is now fully upgradeable to the DF12 and the DF14 giving you complete flexibility over the mug styles you wish to prin on to. The DF1+ Genius with the optional thicker heat blanket makes the DF12 and now the two latte mug blankets can be fitted enabling this to upgrade all the way to the DF14. One simple mug press with great upgrade potential - Genius!
New for 2016 will be 2 further additions to this press enabling printing onto small conical shot glasses as well as mini mugs which have so far only been printable in 3D machines. These extra heat blankets will further enhance the flexibility of this mug press.
The digital control has 3 settings - an idle temperature, operating temperature and timer. You can set the idle temperature the same as the operating temperature if you prefer (with a safety mug in place to protect the blanket) or set the idle temperature low (say 110 degrees) and the operating temperature at 180 degrees. The mug press should NOT be operated at temperatures above 120 degrees without a mug in place.
Once the idle temp has been reached the unit beeps every second or so to let you know it is idling and you simply press the start/stop button on the right of the panel to start the heating up process. Once the operating temperature has been reached the timer starts to count down and sounds a continuous tone when the time has been reached. Simply press the start/stop button again and the unit returns to the idle temp ready for the next mug.
This mug press is calibrated to work in Celsius and we recommend the idle temperature to be set to 110C and the operating temperature of 180C for a time of 150 seconds.
- Mug blanket warranty is 3 months or 500 mugs whichever occurs sooner. Replacement blankets are available.
- Note - If you're using a Ricoh printer drop your temperature to 170 degrees
- and your time to 140 seconds.
There are currently no reviews for this product.