Kids Drinks Bottles
Kids Water Bottles in 4 colour tops.
These new Kids Drinks Bottles have a white base which is fully printable in a standard mug press. Made of similar material to our polymer products these are lightweight and will not smash if dropped.
To print onto the lower part of the drinks bottle you will need to insert a metal puck which is used to ensure the shape of the drinks container does not distort during the heating process and this is standard practice with all our polymer products.
Once printed, the top part of the drinks bottle is screwed to the lower part and you have a complete drinks bottle.
Nlote the different designs on these drinks bottles - the blue bottle is plain, the pink bottle has a different cap opening style with a motif on the top and the yellow has a smiling face with the green button doubling up as a nose!
New colour just arrived - bright green colour in the blue cap design.
Overall sizes are 80mm diameter (same as a standard mug) by approx 170mm tall (printable area 95mm tall max). To give some idea of the amount of liquid they hold - a standard mug (e.g. our European Mug) will fill the kids drinks bottles just over 3/4 full in the part below the screw lid.
Recommend temp and time with our DF1, DF12 and DF14 mug presses 125 degrees idle temp, 170 degrees operating temp, 90 seconds. With other mug presses we would suggest 170 degrees for 150 seconds.
Bulk Quantity Prices
|1 to 47||£3.10 (excl. VAT)|
|48 to 500||£2.90 (excl. VAT)|