DF1 Mug Press
DF1 Mug Press.
New DF1 Mug press with a standard heat blanket for sublimation mugs.
Our new entry level DF1 mug press offers excellent value for money for printing
sublimation or laser transfer mugs. Ideal for all our standard mugs including the 11oz,
European, El-Grande, Beer Steins, WOW, Blank Panel, Money Boxes, Sparta,
Whiskey Glass and Glass Mugs.
The digital control has 3 settings - an idle temperature, operating temperature and
timer. You can set the idle temperature the same as the operating temperature if you
prefer (with a safety mug in place to protect the blanket) or set the idle temperature
low (say 110 degrees) and the operating temperature at 180 degrees. The mug press
should NOT be operated at temperatures above 120 degrees without a mug in place.
Once the idle temp has been reached the unit beeps every second or so to let you
know it is idling and you simply press the start/stop button on the right of the panel to
start the heating up process. Once the operating temperature has been reached the
timer starts to count down and sounds a continuous tone when the time has been
reached. Simply press the start/stop button again and the unit returns to the idle temp
ready for the next mug.
This mug press is calibrated to work in Celsius and we recommend the idle
temperature to be set to 110C and the operating temperature of 180C for a time of
150 seconds.
Key Features
- Mug blanket warranty is 3 months or 500 mugs whichever occurs sooner. Replacement
- blankets are available.
- Note - If you're using a Ricoh printer and experience browning on your mugs after
- pressing at the recommended temp and time, drop your temperature to 170 degrees
- and your time to 140 seconds.
Useful Links
Bulk Quantity Prices
| Bulk Quantity | Price |
|---|---|
| 1 to 1 | £150.00 (excl. VAT) |
| 2 to 4 | £140.00 (excl. VAT) |
| 5 to 10 | £125.00 (excl. VAT) |